I wouldn't pay to have it done because I would do it myself. :) I'm no expert but I'm pretty good. It might take me 2 or 3 times longer but I'd get it done and save a lot of money!
You may want to do it yourself but if it goes wrong you can’t press the pause button while you go to the refrigerator for a beer. This guy is a pro he makes cutting a tree and dropping it where he wants it look like child’s play. Watch titan tech for errors when felling trees. If you drop the tree on your car or your house I will watch you there!
For fell around 500-1000 € For fell and cutting the log around 1000-1500€ For cleaning and taking away around 3000-4000€ 5 birches Price in 🇸🇪 two years ago
I would like to ask a question of you. Why do you make a flat cut on each side of the tree after you make the undercut? Is it to give you a better idea of when the tree is starting to fall?
Straight felling one (leaning) tree with a jack assist 100 euros + limbing and bucking into 40 centimeter sections another 50 euros. So two trees 300 euros, maybe.
U was w Finlandii ludzie więcej pieniędzy mają jak u nas w Polsce ja to by tobie nie zaplacił bo sam dam rady sciać 😂 . W Polsce to od 100 zł do x zależy od drzewa ale tak jak ja od góry nie ścinam bo zdrowie mi nie pozwala to tak do 600 zł max . Pozdrawiam serdecznie i myślę że dobrze przetlumaczyło . Ps zdrowych spokojnych świąt
When your bar & chain oil leaks out after running the saw. Do you know how to prevent it fron leaking at all or if it does it won't leak anywhere nearly as nuch? No, not pour it out. I'm only curious as to how many people know to do this with their saw before putting it in a carry box or storing it.
@toddb930 I can't say that it works on all saws but it will make a big difference even if it doesn't stop it from leaking. Well, leaking isn't exactly the right word for it. The oiler works on a vacuum that is pulked from a line on the carburetor. When you stop the ignition, the oiler tank still has a vacuum on it. Simply open your oil tank lid ¼-½ turn. I've yet to see a Husqvarna saw it didn't improve how much oil was lost or it stop it completely. WARNING, I had to make myself close the tank cap before every use, of course me being a slow learner on certain things that was after I lost 2 of them from backing all the way out since I had opened it.
@toddb930 No problem, hope it works for you. It's frustrating as can be to know your saw was full of bar oil & gas but when you double check it, the bar oil is bone dry.
I don't know, if there is some trick for that. My experience is, that every saw is leaking some oil, others more, others less. It haven't bother me. But if you have a solution , please, tell us.
I had one spruce tree on my property that died last year. I cut it down this year. I wish it had not died. Note to myself :: get some gloves that are not slippery.
$2000 if they want the slash removed, along with felling and limbing. $1500 for felling and limbing, owner cleanup. $850 if you fell the tree and walk away. You will put yourself at risk of injury and their house as well. They're paying for the expertise you will use for their safety and yours.
Enpä taitaisi paljon alle 800 lähteä kun kumminkin pitää laskuun sisällyttää etukäteen tehty työ eli paikanpäällä katsominen ja suunnittelu ja vaan pelkät kaadot siis ilman ylimääräistä nehän laskutetaan erikseen
In meiner Region verlange ich in Nachbarschaft (Freunde) 100 bis 150 Euro. Für Kunden (meist 50 bis 60 km entfernt), mindestens 600 Euro wenn es anständige Kunden sind (da bin ich noch günstig). Tendenz 1000 bis 1500 Euro. Es kommt auf die Leistungen an (Entsorgung, Brennholz schneiden, usw). Hier auch nur so günstig weil man genügend Platz hat. Ich zahle in meiner Region 40% Steuer. Das heißt bei 600 Euro bleiben 360 Euro. Davon ist noch keine Anfahrt (Benzin), Motorsäge Benzin, Öl etc bezahlt. Es kommt immer ein bisschen auf Kunden an, helfen die Kunden ein bisschen mit, wird es günstiger. Die 600 Euro sind nur für Kunden für die ich schon mehrfach gearbeitet habe. Neukunden mindestens 800 Euro aufwärts. Nachtrag: tatsächlich hätte ich die Preise die letzten Jahre erhöht. In der Praxis konnte ich den Preis wegen der schlechten Welt wirtschaftlichen Situation nicht erhöhen. Sobald sich die Situation nur ein bisschen erholt, erhöhe ich mindestens um 100% (die Leute haben derzeit kein Geld und jede Firma die es günstiger macht, da ist beim Kunden Ärger (Schaden) inklusive und diese Firma arbeiten maximal 6 Monate)
Kyllä tuossa aikaa menee matkoineen päivineen ja kaikki muut kulut. Ei varmaan kaikkein haastavimmat kaadot, mutta sanotaan myös tuo 1000 e veroineen. Ei kyllä muuten mitään hajuja hinnoista.
helppo on kaataa mutta se siivous kova työ siinä menee aikaa minne oksat pois oksat voi paikkan päällä hakettaa myös mitä asiakkaan kanssa sovitaan kohteen on ertilaisia jos on vaikea puu yhyden puun hinta voi olla 200 euroa siihen ei kuulu siivous pätkinä alas kiipeelemällä hyvin usein tarvittaan maa mies mukaan vielä jos joutuu pudottaa oksia köydellä jos ei ole tilaa pudottaa oksia alas kuka on maa mies ? asikas kuka
I wouldn't pay to have it done because I would do it myself. :) I'm no expert but I'm pretty good. It might take me 2 or 3 times longer but I'd get it done and save a lot of money!
You may want to do it yourself but if it goes wrong you can’t press the pause button while you go to the refrigerator for a beer.
This guy is a pro he makes cutting a tree and dropping it where he wants it look like child’s play.
Watch titan tech for errors when felling trees.
If you drop the tree on your car or your house I will watch you there!
@@davidlampe4153 Interesting comment. Hmmm.... Say, if I drop a tree on my car or house who will be there to film it?
Profesjonalista
Smooth operator
For fell around 500-1000 €
For fell and cutting the log around 1000-1500€
For cleaning and taking away around 3000-4000€
5 birches
Price in 🇸🇪 two years ago
I would like to ask a question of you. Why do you make a flat cut on each side of the tree after you make the undercut? Is it to give you a better idea of when the tree is starting to fall?
Here: 2 reasons why you should cut the sides clean before backcut
ruclips.net/user/shortsHA-YuKPSVUE?feature=share
Straight felling one (leaning) tree with a jack assist 100 euros + limbing and bucking into 40 centimeter sections another 50 euros. So two trees 300 euros, maybe.
Ja gdzie tak dobrze płaca przyjeżdżam z Polski i robię za 100 euro z pocięciem w pieńki
В Беларуси машина дров 100евриков
@@дядюшкаау-з5х witam brata słowianina i zapraszam do siebie na filmiki
Stihl güçlü motordur,sorunsuzdur genelde lakin ağır motordur,uzun çalışmalarda insanı yorar.👍🇹🇷
Kyllä meni vanhat ja kauniit kuuset pihalta.
Olikohan tossa toisessa joku sairaus, kun alaoksat puuttuvat kokonaan
Kaikki menee, mitä tilataan
Pihakuuset, isot, voi kaataa isoina ja kaatokelpoisina, tai, isoina ja lahoina jonnekin suuntaan ehkä kaatuvina.
Tunti työtä. Minä olisin tehnyt tuon naapurille satasella. Vähän kauemmas 150€.
U was w Finlandii ludzie więcej pieniędzy mają jak u nas w Polsce ja to by tobie nie zaplacił bo sam dam rady sciać 😂 . W Polsce to od 100 zł do x zależy od drzewa ale tak jak ja od góry nie ścinam bo zdrowie mi nie pozwala to tak do 600 zł max . Pozdrawiam serdecznie i myślę że dobrze przetlumaczyło . Ps zdrowych spokojnych świąt
😃👍🏻👍🏻
1,000 US dollars. What brand of chain do you use?
I use Stihl with Stihl chainsaws, and Husqvarna with Husqvarna chainsaws. I have been happy with the main brands
When your bar & chain oil leaks out after running the saw. Do you know how to prevent it fron leaking at all or if it does it won't leak anywhere nearly as nuch? No, not pour it out. I'm only curious as to how many people know to do this with their saw before putting it in a carry box or storing it.
@@kevinelrod323 I don't know. Can you tell me if there is a way to stop the bar oil leaking?
@toddb930
I can't say that it works on all saws but it will make a big difference even if it doesn't stop it from leaking. Well, leaking isn't exactly the right word for it. The oiler works on a vacuum that is pulked from a line on the carburetor. When you stop the ignition, the oiler tank still has a vacuum on it. Simply open your oil tank lid ¼-½ turn. I've yet to see a Husqvarna saw it didn't improve how much oil was lost or it stop it completely. WARNING, I had to make myself close the tank cap before every use, of course me being a slow learner on certain things that was after I lost 2 of them from backing all the way out since I had opened it.
@kevinelrod323 thanks for the explanation!!
@toddb930
No problem, hope it works for you. It's frustrating as can be to know your saw was full of bar oil & gas but when you double check it, the bar oil is bone dry.
I don't know, if there is some trick for that. My experience is, that every saw is leaking some oil, others more, others less. It haven't bother me. But if you have a solution , please, tell us.
300.00 dollars we clean up.
God bless,matthew 6:33, proverbs3:5
Hey, there's no pocket on the tee-shirt. What's up with that?
I had one spruce tree on my property that died last year. I cut it down this year. I wish it had not died.
Note to myself :: get some gloves that are not slippery.
$2000 if they want the slash removed, along with felling and limbing. $1500 for felling and limbing, owner cleanup. $850 if you fell the tree and walk away. You will put yourself at risk of injury and their house as well. They're paying for the expertise you will use for their safety and yours.
Enpä taitaisi paljon alle 800 lähteä kun kumminkin pitää laskuun sisällyttää etukäteen tehty työ eli paikanpäällä katsominen ja suunnittelu ja vaan pelkät kaadot siis ilman ylimääräistä nehän laskutetaan erikseen
In meiner Region verlange ich in Nachbarschaft (Freunde) 100 bis 150 Euro. Für Kunden (meist 50 bis 60 km entfernt), mindestens 600 Euro wenn es anständige Kunden sind (da bin ich noch günstig). Tendenz 1000 bis 1500 Euro. Es kommt auf die Leistungen an (Entsorgung, Brennholz schneiden, usw). Hier auch nur so günstig weil man genügend Platz hat. Ich zahle in meiner Region 40% Steuer. Das heißt bei 600 Euro bleiben 360 Euro. Davon ist noch keine Anfahrt (Benzin), Motorsäge Benzin, Öl etc bezahlt.
Es kommt immer ein bisschen auf Kunden an, helfen die Kunden ein bisschen mit, wird es günstiger.
Die 600 Euro sind nur für Kunden für die ich schon mehrfach gearbeitet habe. Neukunden mindestens 800 Euro aufwärts.
Nachtrag: tatsächlich hätte ich die Preise die letzten Jahre erhöht. In der Praxis konnte ich den Preis wegen der schlechten Welt wirtschaftlichen Situation nicht erhöhen. Sobald sich die Situation nur ein bisschen erholt, erhöhe ich mindestens um 100% (die Leute haben derzeit kein Geld und jede Firma die es günstiger macht, da ist beim Kunden Ärger (Schaden) inklusive und diese Firma arbeiten maximal 6 Monate)
Husqvarna 💪 dobra robota .
Ok lets go do something in woods
Euro 1000.
Kyllä tuossa aikaa menee matkoineen päivineen ja kaikki muut kulut. Ei varmaan kaikkein haastavimmat kaadot, mutta sanotaan myös tuo 1000 e veroineen. Ei kyllä muuten mitään hajuja hinnoista.
350€
Ich würde 100€ je Baum nehmen
150 euroa
kaato pätkintä ja siivous siis koko työ 300euroa
helppo on kaataa mutta se siivous kova työ siinä menee aikaa minne oksat pois oksat voi paikkan päällä hakettaa myös mitä asiakkaan kanssa sovitaan kohteen on ertilaisia jos on vaikea puu yhyden puun hinta voi olla 200 euroa siihen ei kuulu siivous pätkinä alas kiipeelemällä hyvin usein tarvittaan maa mies mukaan vielä jos joutuu pudottaa oksia köydellä jos ei ole tilaa pudottaa oksia alas kuka on maa mies ? asikas kuka
Mam Stihl i mnie denerwuje a hushwarna 💪
Co to za dziwny język?
@@slowdiesel1044 Polsce
Ende encontro este macaco.idraulico. Empurrar árvore quero comprar um urgente
I know one that make tree jack
@Simson596 tem como escrever em português amigo